The insulation can be applied to floor, wall and ceiling (new buildings and renovation)
Dry and stable clean supports such as wood, metal, concrete, stone, plaster can be insulated
On the floor the latter must systematically be covered with a fluid screed or a traditional mortar. On the wall it must be covered with cladding, gypsum board or counter-partition
Spray systems are applied by professional suitably equipped and trained in the projection of polyurethane
The insulation processes can accommodate any type of underfloor heating
Sustaintable Solution
Polyurethane is rot-proof. It therefore has the life span of your home
The insulation is very used in the agricultural environment because it very little sensitive to rodents and insects. Unlike other insulation rodents have no appetite for polyurethane and they do not nest inside
Polyurethane is an impermeable material. In the frame of the projection it is also airtight
On-site manufacturing makes it possible to reduce emissions related to transport
Better thermal properties than PSE, XPS and rockwool or glass-wool
Resistant to chemicals
Safe Solution
The foam has a composition similar to insulation of fridges. It is stable
All certified insulators have a compressive strength of between 150 KPA (15 Tons) and 286 KPA (about 28 Tons) per m²
The insulation polymerizes immediately, it dries in 15 seconds and after a few minutes you can walk on it
The polyurethane is very fire resistant. Indeed, it is the organic insulation that best resists fire. It does not drip and if the flame goes out, the polyurethane stops burning, it is self-extinguishing by adding a flame retardant
Polyurethane releases less toxic vapors than sheep wool. The emissions of toxic gases intervene above 300 ° C
24 hours after projection of the insulation PU foam is inert
Cost-effective Solution
Easy and quick application
On the ground, the projected insulation allows the removal of a screed. On a house of 120 m² you gain 10 tons
Polyurethane insulation is the best performing insulation on the market. It guarantees a total suppression of thermal bridges leading to energy savings. Thermal conductivity is 0,015 - 0,022 W/(K.m)
